It is configured for unknown destination from the local LAN network. If the network has to access to the internet, it is configured. It is configured in the edge router or border router from where the internet is accessed.
syntax:
HYD(config)# ip route 0.0.0.0 0.0.0.0 <destination ip address or own's exit interface> <enter>
Practice:
i. Initial Configuration.
ii. Do the following configuration on packet tracer.
iii. Test: Ping from PC1 or PC0 to Server1 or Server2 and vice Varese.
iv. You can download the completed file here.
syntax:
HYD(config)# ip route 0.0.0.0 0.0.0.0 <destination ip address or own's exit interface> <enter>
Practice:
i. Initial Configuration.
iii. Test: Ping from PC1 or PC0 to Server1 or Server2 and vice Varese.
iv. You can download the completed file here.
gazap rahecha mitra
ReplyDelete